About

Description

eSUN PLA+ Black 1.75mm 1kg/2.2lbs

FDM 3D Printer Filament 

Product Description :

Dimensional Tolerance +/- 0.03mm - Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.

Tangle Free & No Plugging - Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

Environmental Friendly Material - PLA+ is improved and upgraded based on PLA, high strength and better toughness. eSUN filaments are made with virgin materials, biodegradable and eco-friendly, non-toxic and low odor, NO harm to user and environment.

Vacuumed Sealed Packaging - Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.

eSUN 3D Printer Filament: PLA PRO (PLA+)
Extrusion Temperature Range: 205 to 225 Celsius

PLA PRO(PLA+) Advantages:
Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break.

PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius.

PLA+ has a low shrinkage rate and sticks very well both to bed and layer to layer.

PLA+ is a biological material, extracted and purified from corn grain, eco- friendly, odorless, and harmless to human.

1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool
eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding.

Several times stronger than PLA.
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 205C - 225C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"

    Description

    eSUN PLA+ Black 1.75mm 1kg/2.2lbs

    FDM 3D Printer Filament 

    Product Description :

    Dimensional Tolerance +/- 0.03mm - Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.

    Tangle Free & No Plugging - Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

    Environmental Friendly Material - PLA+ is improved and upgraded based on PLA, high strength and better toughness. eSUN filaments are made with virgin materials, biodegradable and eco-friendly, non-toxic and low odor, NO harm to user and environment.

    Vacuumed Sealed Packaging - Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.

    eSUN 3D Printer Filament: PLA PRO (PLA+)
    Extrusion Temperature Range: 205 to 225 Celsius

    PLA PRO(PLA+) Advantages:
    Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break.

    PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius.

    PLA+ has a low shrinkage rate and sticks very well both to bed and layer to layer.

    PLA+ is a biological material, extracted and purified from corn grain, eco- friendly, odorless, and harmless to human.

    1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool
    eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding.

    Several times stronger than PLA.
    1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
    Recommended Extrusion/Nozzle Temperature 205C - 225C
    Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"

      Afterpay
      Now Available
      Printme by Printme

      4.0

      1 reviews

      eSUN PLA+ Black 1.75mm 1kg/2.2lbs

      Regular price
      $34.99
      Sale price
      $34.99
      Regular price
      Tax included. Shipping calculated at checkout.
      Items Are Sent Out Daily Via NZ Post
      Keep an eye on your emails/phone for tracking information.

      Check Out These Related Products

      Customer Reviews

      Based on 1 review
      0%
      (0)
      100%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      B
      Brad Kessell
      eSun, consistant peformer

      Keep it dry and youll more often than not get good results