About

Description

eSUN HIPS Natural 1.75mm 1kg/2.2lbs

Description

It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.

Key points:

Solubility
Support
Heat resistance

High toughness

High impact resistance

Filament Properties Table:
3D PRINTING FILAMENT HIPS
Density(g/cm3) 1.05
Heat Distortion Temp(℃,0.45MPa) 80
Melt Flow Index(g/10min) 3(200℃/5kg)
Tensile Strength(MPa) 27
Elongation at Break(%) 55
Flexural Strength(MPa) 39
Flexural Modulus(MPa) 2280
IZOD Impact Strength(kJ/㎡) 11
Durability 7/10
Printability 6/10
Recommended printing parameters
Extruder Temperature(℃) 230 – 270℃
Recommended temperature：250℃
Bed temperature(℃) 100 – 115°C
Fan Speed 0%
Printing Speed 40 – 100mm/s
Heated Bed Required
Recommended Build Surfaces Glass plate, PVP solid glue, high temperature tape

Description

eSUN HIPS Natural 1.75mm 1kg/2.2lbs

Description

It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.

Key points:

Solubility
Support
Heat resistance

High toughness

High impact resistance

Filament Properties Table:
3D PRINTING FILAMENT HIPS
Density(g/cm3) 1.05
Heat Distortion Temp(℃,0.45MPa) 80
Melt Flow Index(g/10min) 3(200℃/5kg)
Tensile Strength(MPa) 27
Elongation at Break(%) 55
Flexural Strength(MPa) 39
Flexural Modulus(MPa) 2280
IZOD Impact Strength(kJ/㎡) 11
Durability 7/10
Printability 6/10
Recommended printing parameters
Extruder Temperature(℃) 230 – 270℃
Recommended temperature：250℃
Bed temperature(℃) 100 – 115°C
Fan Speed 0%
Printing Speed 40 – 100mm/s
Heated Bed Required
Recommended Build Surfaces Glass plate, PVP solid glue, high temperature tape