eSUN eClean 1.75mm 0.1kg

Used to clean the nozzles of the printers, After printing, use eClean filament to clean the nozzles, and then print other colors or types of materials.
Especially when you plan to print low-temperature materials such as PLA and high-temperature materials such as carbon fiber reinforced nylon filament, eClean will greatly reduce the possibility of nozzle clogging;
Transparent color and wide use temperature make eClean suitable for cleaning different colors, types and printing temperatures filaments.

160-300℃ Printing Filaments
Heated Bed Required

Filament Properties Table
3D PRINTING FILAMENT eClean
Density(g/cm3) 0.95
Heat Distortion Temp(℃,0.45MPa) 45
Melt Flow Index(g/10min) /
Tensile Strength(MPa) 23
Elongation at Break(%) 580
Flexural Strength(MPa) /
Flexural Modulus(MPa) /
IZOD Impact Strength(kJ/㎡) 29
Durability /
Printability /
Recommended printing parameters
Extruder Temperature(℃) 160 – 300℃
Bed temperature(℃) ——
Fan Speed ——
Printing Speed ——
Heated Bed ——
Recommended Build Surfaces ——